Tuesday, December 31, 2013

ROLLING GATES ARE A DIFFERENT KIND OF ANIMAL, BUT WE'VE TAMED IT!

WE OFFER ROLLING GATE KITS TOO!


first050-1first058
We offer the rolling (sliding) gate kits which includes:
14 Gauge Trussed Steel Frame, Wheels, Guide Posts, Guide Rollers , Track
This is everything you will need except the wood or vinyl facing
material & Concrete track apron.

Installing a GateBuilder Rolling/Sliding Gate is so Easy & So Reasonable. You Can
Utilize an Automatic Gate Opener on a GateBuilder Rolling/Sliding Gate Frame
You Will Save Hundreds of Dollars Installing Your Own Rolling/Sliding Gate
"A Professional Grade Gate @ a Fraction of  the Cost"
It's Easy To Order!

Order Today!
We'll Ship Right to Your Job
10'  thru 13' working width              $ 1799.00
 14' thru   16' working width             $ 1999.00
plus shipping
Up to 6' in Height
1-619-729-0420
GateBuilder@hotmail.com





Paypal

ROLLING GATE KITS - EXCEPTIONAL PRICES

WE OFFER ROLLING GATE KITS TOO!


first050-1first058
We offer the rolling (sliding) gate kits which includes:
14 Gauge Trussed Steel Frame, Wheels, Guide Posts, Guide Rollers , Track
This is everything you will need except the wood or vinyl facing
material & Concrete track apron.

Installing a GateBuilder Rolling/Sliding Gate is so Easy & So Reasonable. You Can
Utilize an Automatic Gate Opener on a GateBuilder Rolling/Sliding Gate Frame
You Will Save Hundreds of Dollars Installing Your Own Rolling/Sliding Gate
"A Professional Grade Gate @ a Fraction of  the Cost"
It's Easy To Order!

Order Today!
We'll Ship Right to Your Job
10'  thru 13' working width              $ 1799.00
 14' thru   16' working width             $ 1999.00
plus shipping
Up to 6' in Height
1-619-729-0420
GateBuilder@hotmail.com





Paypal

Thursday, November 28, 2013

WHO ARE WE THANKING ON THANKSGIVING?




Our Forefathers gathered together and celebrated 
Thanksgiving to thank God for His goodness, provision and the grace He provided in their struggle to survive in a new and harsh environment.


God is still good, provides what we need and gives us the grace to endure both collectively and as individuals.

A Christian is by definition: One who has accepted Jesus Christ as their Personal Savior.  One that has confessed and repents of their sins, One that has turned over their life to Jesus. One that lets Jesus guide them through the events of their daily lives. One that knows that there is a Heaven and there is Eternal Life with Jesus as their King. 

We lost a young member of our greater family today.  It has been interesting to note how each of the family members dealt with the tragedy.  Those that I believe are truly Christians were able to accept it with a peace that seems to surpass understanding.  Even though they will miss our departed family member, they all seemed to understand that death is as much a part of life as birth.  They seem to intuitively know that a person's time on earth, whether they live one day or 100 years, is merely a nanosecond with respect to the duration of  time associated with eternity.. On the other hand, those that I do not believe or know the Lord Jesus at this point in their lives don't possess this understanding about life. They are distraught, lost and  afraid. They don't understand the larger picture. They question why it happened and begin to ponder and fear their own eventual death. 

If you are not a Christian and you have shared the kind of feelings my non Christian relatives are feeling as I write, Consider the Fact that Jesus is real.  He is alive and He is coming again to rule the earth and his people. His people are not all of the people that have lived on the earth through history, they are actually only those that have accepted him as their Savior and have given themselves to him and his service for all eternity.

What's in it for me?  

Peace, lack of fear of the unknown, and confidence that His Word is the Truth and the Light and I will Serve God through my Lord Jesus Christ for all eternity.  

Bottom line, it takes away the worry so prevalent in this world.
Accept Jesus Christ as your Personal Savior Today, It will change your outlook and life forever.

 Jesus said to her, “I am the resurrection and the life. The one who believes in me will live, even though they die; and whoever lives by believing in me will never die. Do you believe this?”
John  11:25  - 26


Thanks for letting me share this with you, 

Tony Whyte
The Victoria House Company
Southern Crossings Gate Systems / GateBuilder Gate Frames
619 729 0420

Wednesday, November 27, 2013

WE MANUFACTURE LASER ART ROLLING GATES






Quote: from customer: "Tony, gate is awesome. for sure gonna be using your services in the future. awesome design. easy install. love it."





THE 4TH DIMENSION IS PERFORMANCE







GateBuilder Gate Frame Pricing
GateBuilder Manufactures custom frames to fit any opening dimensions
Height of Frame up to 6′
Single Leaf Gate Configuration
Single Panel      3′  thru   4′  width              $ 399.00
Double Panel     5′  thru 10′  width             $ 699.00
Triple Panel     11′  thru 13′ width               $ 999.00
4 panel              13′ thru 16′ width              $ 1299.00

Double Leaf Gate Configuration
Select any two of the above single leaf gate configurations
(Single Panel, Double Panel, Triple Panel) to configure symmetrical or     asymmetrical double leaf gates)

All hardware included


PRICES INCLUDE THE COST OF SHIPPING

We manufacture to your actual width & height  requirements

It’s Easy To Order!
Order Today

619 445 1135
GateBuilder@hotmail.com
www.GateBuilderKits.com





Victoria House Company


is the Manufacturer and Distributer of GateBuilder Gate Frames



We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.


We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantys of the companies manufacturing the product.


We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.


Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.


We absolutely guarantee our products and stand behind our products 100%


If We Say It, "Consider it Done"


We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.


We will provide you with references of satisfied customers upon request.


Tony & Diana Whyte
Owners - The Victoria House Company




GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 1135

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!

Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com











ROLLING GATE KITS THAT ARE ENGINEERED FOR AUTOMATIC OPENERS




KEEP THESE GUYS IN THE BACKYARD


Quote: from customer: "Tony, gate is awesome. for sure gonna be using your services in the future. awesome design. easy install. love it."





THE 4TH DIMENSION IS PERFORMANCE







GateBuilder Gate Frame Pricing
GateBuilder Manufactures custom frames to fit any opening dimensions
Height of Frame up to 6′
Single Leaf Gate Configuration
Single Panel      3′  thru   4′  width              $ 399.00
Double Panel     5′  thru 10′  width             $ 699.00
Triple Panel     11′  thru 13′ width               $ 999.00
4 panel              13′ thru 16′ width              $ 1299.00

Double Leaf Gate Configuration
Select any two of the above single leaf gate configurations
(Single Panel, Double Panel, Triple Panel) to configure symmetrical or     asymmetrical double leaf gates)

All hardware included


PRICES INCLUDE THE COST OF SHIPPING

We manufacture to your actual width & height  requirements

It’s Easy To Order!
Order Today

619 445 1135
GateBuilder@hotmail.com
www.GateBuilderKits.com





Victoria House Company


is the Manufacturer and Distributer of GateBuilder Gate Frames



We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.


We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantys of the companies manufacturing the product.


We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.


Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.


We absolutely guarantee our products and stand behind our products 100%


If We Say It, "Consider it Done"


We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.


We will provide you with references of satisfied customers upon request.


Tony & Diana Whyte
Owners - The Victoria House Company




GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 1135

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!

Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com











ROLLING GATE KITS - EVERYTHING INCLUDED (FRAME, WHEELS, ROLLERS, TRACK, GUIDE POSTS, HARDWARE)




KEEP THESE GUYS IN THE BACKYARD


Quote: from customer: "Tony, gate is awesome. for sure gonna be using your services in the future. awesome design. easy install. love it."





THE 4TH DIMENSION IS PERFORMANCE







GateBuilder Gate Frame Pricing
GateBuilder Manufactures custom frames to fit any opening dimensions
Height of Frame up to 6′
Single Leaf Gate Configuration
Single Panel      3′  thru   4′  width              $ 399.00
Double Panel     5′  thru 10′  width             $ 699.00
Triple Panel     11′  thru 13′ width               $ 999.00
4 panel              13′ thru 16′ width              $ 1299.00

Double Leaf Gate Configuration
Select any two of the above single leaf gate configurations
(Single Panel, Double Panel, Triple Panel) to configure symmetrical or     asymmetrical double leaf gates)

All hardware included


PRICES INCLUDE THE COST OF SHIPPING

We manufacture to your actual width & height  requirements

It’s Easy To Order!
Order Today

619 445 1135
GateBuilder@hotmail.com
www.GateBuilderKits.com





Victoria House Company


is the Manufacturer and Distributer of GateBuilder Gate Frames



We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.


We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantys of the companies manufacturing the product.


We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.


Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.


We absolutely guarantee our products and stand behind our products 100%


If We Say It, "Consider it Done"


We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.


We will provide you with references of satisfied customers upon request.


Tony & Diana Whyte
Owners - The Victoria House Company




GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 1135

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!

Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com











ROLLING GATES - YOU CAN'T BUY A GOOD ONE @ LOWES OR HOME DEPOT




KEEP THESE GUYS IN THE BACKYARD


Quote: from customer: "Tony, gate is awesome. for sure gonna be using your services in the future. awesome design. easy install. love it."





THE 4TH DIMENSION IS PERFORMANCE







GateBuilder Gate Frame Pricing
GateBuilder Manufactures custom frames to fit any opening dimensions
Height of Frame up to 6′
Single Leaf Gate Configuration
Single Panel      3′  thru   4′  width              $ 399.00
Double Panel     5′  thru 10′  width             $ 699.00
Triple Panel     11′  thru 13′ width               $ 999.00
4 panel              13′ thru 16′ width              $ 1299.00

Double Leaf Gate Configuration
Select any two of the above single leaf gate configurations
(Single Panel, Double Panel, Triple Panel) to configure symmetrical or     asymmetrical double leaf gates)

All hardware included


PRICES INCLUDE THE COST OF SHIPPING

We manufacture to your actual width & height  requirements

It’s Easy To Order!
Order Today

619 445 1135
GateBuilder@hotmail.com
www.GateBuilderKits.com





Victoria House Company


is the Manufacturer and Distributer of GateBuilder Gate Frames



We are a family owned and operated business located in Alpine, California, a small community east of San Diego, Ca. We are the manufacturer and distributor of Southern Crossings Gate products. It has been our goal from the beginning, to offer attractive, high quality, top-of-the-line products at reasonable pricing.


We are building this business in a world where it is often difficult to discern if a business is legitimate and honest. People tend make their purchases from large companies like Home Depot or Lowes because they feel that they can trust them to stand behind the products they offer for sale only to find out that the products are often mediocre and only subject to the warrantys of the companies manufacturing the product.


We manufacture superior products are built with heavy duty materials and are absolutely guaranteed not to sag. In addition, all parts are either Coated with a Superior Coating Product or zinc plated for long lasting beauty.


Our gate products are also head and shoulders above other well known manufacturers that offer their products for sale on the internet.


We absolutely guarantee our products and stand behind our products 100%


If We Say It, "Consider it Done"


We hope you will order our gate products with the confidence that you will actually get what you paid for and that they will perform as promised.


We will provide you with references of satisfied customers upon request.


Tony & Diana Whyte
Owners - The Victoria House Company




GateBuilder Gate Frames
Lasting Performance
Assembles & Installs Like Magic
Designed by a Former Gate Installer
Who Figured out How to Do It Better
Imagine a Gate that will never Sag




We Make the Frame, Supply the Hardware!
You do the Fun Part, the Art Work when you apply the Facing Materials!
You Will Find GateBuilder Gate Frames are Better Than You Ever Expected
View a Customers Side Show of a Beautiful Wooden Gate that He Built on GateBuilder Frames


The Wooden Fencing Panels Utilized on these Gates Were Purchased from Home Depot
Mounted on a GateBuilder 'X' Gate 16' Modular Frame
Contractors & Gate Builders,
I'm Tony Whyte Owner & General Manager of  the Victoria House Company.  We Manufacture Gates under the Trade Names Southern Crossings Gates & GateBuilder Gate Frames.
We have superior products that are not well known.  We have exhibited from time to time at Home Shows and the Southern California Landscape Contractors Expo.  Our products have been well received and it's time to broaden our product reach.
The modularity of our frames is its real strength.  The system is stronger than welded frames and much easier to install. Because our frames are modular they are also well suited to shipping at reasonable cost.

GateBuilder Frames are superior in strength because they are a true truss system as would be engineered for roof trusses or bridge construction.  They are built of heavy duty materials that parlay into an amazingly light Wooden Gate once the wood facing material is applied.  A GateBuilder frame is guaranteed not to sag and will outlast many generations of refacing.

If you are a Contractor, you have never installed a gate that will be easier or better performing.

We would like to be your Gate Supplier of Choice  -  Please give me a call
619 729 0420 or 619 445 1135

Sincerely,
Tony Whyte
Steel Gate Frame for Wood & Vinyl Gates
"Beats Adjust-A-Gate Hands Down"
Steel for Strength! Trussing in both Compression & Tension  prevents sag!
Gates are hung in cantilever. This means that the gate is supported at only one end.  Because of this, especially for wider gates, the hinges must be strong, the frame must be strong and solid cross bracing within the frame is a must.
Most gate frames utilize a cable that spans from the top hinge corner to the bottom corner of the unsupported end of the gate.  This approach attempts to control sag  through tension by holding up the bottom corner of the unsupported end of the gate.  This approach only addresses the force of tension that is being placed on the gate, but ignores the considerable compression force that is in play when a gate is installed.  An approach, that only addresses tension, will work for a while until the cable stretches and/or the corners give way.  The only way that this approach will work over time, is to install a support foot or wheel for the gate at the unsupported end.
A gate built with a true truss frame utilizes strong hinges, a strong frame with solid corner connections, and solid cross bracing (that cannot stretch) that extends from corner to corner each way. This addresses the forces of both tension and compression that is placed on the gate once it is installed.  With this approach, a support foot or wheel will not be required.
Most of the popular steel gate frames offered for sale in the market are not utilizing true truss technology which is required to effectively address gate sag. .

Happiness is Building a Gate With a GateBuilder Gate Frame
Fully Adjustable to fit your gate opening!
It’s Easy To Order!
Order Today RIGHT NOW!

Includes the Cost of Shipping
619 445 1135    619 729-0420
gatebuilder@hotmail.com